Bed Leveling Guide: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
If a 3D printer has an unlevel bed, there are a few symptoms that may arise. | If a 3D printer has an unlevel bed, there are a few symptoms that may arise. | ||
# Filament does not stick to the bed | |||
# Filament is not properly "squished" between layers (see Figure 1) | |||
# On the first layer, the filament is too squished and the nozzle is rubbing on the bed ('''If this is the case IMMEDIATELY stop the print!''') | |||
# Filament is warping during the print | |||
Revision as of 12:57, 20 November 2020
Unlevel beds are a common issue with most FDM 3D printers. Because these beds sit on springs and are generally exposed to large heat fluctuations, beds can easily become unlevel with time.
- Note, this page is currently under construction
Symptoms of an Unlevel Bed
If a 3D printer has an unlevel bed, there are a few symptoms that may arise.
- Filament does not stick to the bed
- Filament is not properly "squished" between layers (see Figure 1)
- On the first layer, the filament is too squished and the nozzle is rubbing on the bed (If this is the case IMMEDIATELY stop the print!)
- Filament is warping during the print