Polyethylene Terephthalate (PET/PETG)

The relative property levels of PETG.

PETG (Polyethylene Terephthalate) is a commonly use filament FDM 3D printing. It is a more durable version than PLA so can be used in higher stress related prototypes. Notably, PETG is used commonly in the Take-a-T Make-a-T project at the MILL.

The atomic structure of PETG.

Specific Properties

• Printing Temperature (^oC): 220 - 250
• Hot bed Temperature (^oC): 70 - 90
• Printing Speed (mm/s): 40 - 80
• Density (g/cm³): 1.28
• Bending Strength (MPa): 67.5 ± 2.5